You can connect an analog headset to your phone. If an analog headset is connected and in use, glows green. If you use a headset, you can set up your phone so that all calls use your headset (see Enabling Headset Memory Mode). If you use a headset that supports electronic hookswitch (EHS), you can press the hookswitch button to place, answer, and end calls. In addition, you can to mute calls and
control volume from your headset.
Enabling Headset Memory Mode
This feature is useful for full-time headset users. You can set up your phone so that all incoming and outgoing calls use your headset. At any time, you can switch to handset or speakerphone mode.
To use Headset Memory Mode, you must enable and activate Headset Memory Mode. When Headset Memory Mode is activated, flashes either green for analog headsets or blue for USB or Bluetooth headsets.
To enable Headset Memory Mode
- Select Settings from Home view, and select Basic > Preferences > Headset > Headset Memory.
- From the Headset Memory Mode screen, select Enabled
To activate Headset Memory Mode
» Press twice.
The Headset key flashes to indicate that the phone is in Headset Memory Mode.
Now, whenever you answer a call, the call connects to your headset automatically.
If you switch to the speakerphone or the handset, you deactivate Headset Memory Mode. Calls no longer automatically go to your headset, unless you choose this mode. To have calls go to your headset again, activate Headset Memory Mode by pressing twice.